Calendar
June 2018
M T W T F S S
« May    
 123
45678910
11121314151617
18192021222324
252627282930  
Categories
ELETTRONICA Gold Mobile LED WCDMA 2100MHz & GSM 900MHz Signal Booster / Signal - April 26, 2018 by admin
ELETTRONICA Gold Mobile LED WCDMA 2100MHz & GSM 900MHz Signal Booster / Signal

ELETTRONICA Gold Mobile LED WCDMA 2100MHz & GSM 900MHz Signal Booster / Signal

ELETTRONICA Gold Mobile LED WCDMA 2100MHz & GSM 900MHz Signal Booster / Signal

Gold Mobile LED WCDMA 2100MHz & GSM 900MHz Signal Booster / Signal Repeater wit. Vedi i nostri feedback. In case of emergency a timely call can save a life. Unfortunately, there are still some places where one can find themselves – out of coverage. Here we will bring you a new kind of LED signal booster. High-gain linear power amplifier. ALC and AGC function technology. Ultra-low noise receive amplifier. There is no interference to the base station, right after the opening of the original system and the base station without the need to adjust parameters. Stable and reliable electromagnetic compatibility design. The base station dose not cause an increase in background noise, but will not lead to a decline in the quality of the base station communications. With full-duplex communication mode. It explores an effective and reasonable method to dispel the heat. Install outdoor antenna in that location and keep adjusting, point it to signal tower station, try to get best signal. Run outdoor coaxial cable into building in a convenient location to connect with signal repeater. Mount your indoor antenna with signal repeater. Power up signal repeater device to check the signal inside, moving outdoor antenna until you get satisfied signal. Connect outdoor (BTS) port with outdoor antenna. Connect indoor ANT (MS) port with indoor antenna. Outdoor antenna is mounted at a higher position. Both antennas should be 10 meters far away at least from each other. Indoor and outdoor antennas must be separated by wall. If the signal is still weak after installation, please check whether or not the outdoor antenna is pointed to signal tower correctly or elsewhere with stronger signal and confirm that the signal strength achieved -70dBm. If no signal for a long time after installation, please check the device power adapter whether or not connected perfectly and connectors connect well. If strength is not steady, please check if outdoor and indoor antennas are too close. Please ensure outdoor antenna has distance of 10 meters at least, with a barrier and not in a same horizontal line. Packed the outdoor connector by waterproof glue, otherwise wet condition will reduce the signal cover area. 198 x 182 x 20mm. 1 x 9dB Outdoor Antenna 1 x 5dB Indoor Antenna 1 x 5m RG6-50 OHM Indoor Coaxial Cable 1 x 10m RG6-50 OHM Outdoor Coaxial Cable 1 x Mounting Accessories Set 1 x AC Power Supply 1 x Manual. Uplink 18-22dBm Downlink 18-22dBm. Faqs – Termini e condizioni. The item “ELETTRONICA Gold Mobile LED WCDMA 2100MHz & GSM 900MHz Signal Booster / Signal” is in sale since Wednesday, February 04, 2015. This item is in the category “Telefonia fissa e mobile\Accessori cellulari e palmari\Amplificatori di segnale”. The seller is “napolitano86″ and is located in Nola, Napoli IT. This item can be shipped worldwide.
  • Brand: Unbranded/Generic
  • Marca: Unbranded/Generic
  • MPN: SK_S-SPB-0012
TECH Gold Mobile LED WCDMA 2100MHz & GSM 900MHz Signal Booster / Signal Repeate - April 14, 2018 by admin
TECH Gold Mobile LED WCDMA 2100MHz & GSM 900MHz Signal Booster / Signal Repeate

TECH Gold Mobile LED WCDMA 2100MHz & GSM 900MHz Signal Booster / Signal Repeate

TECH Gold Mobile LED WCDMA 2100MHz & GSM 900MHz Signal Booster / Signal Repeate

Gold Mobile LED WCDMA 2100MHz & GSM 900MHz Signal Booster / Signal Repeater wit. Vedi i nostri feedback. In case of emergency a timely call can save a life. Unfortunately, there are still some places where one can find themselves – out of coverage. Here we will bring you a new kind of LED signal booster. High-gain linear power amplifier. ALC and AGC function technology. Ultra-low noise receive amplifier. There is no interference to the base station, right after the opening of the original system and the base station without the need to adjust parameters. Stable and reliable electromagnetic compatibility design. The base station dose not cause an increase in background noise, but will not lead to a decline in the quality of the base station communications. With full-duplex communication mode. It explores an effective and reasonable method to dispel the heat. Install outdoor antenna in that location and keep adjusting, point it to signal tower station, try to get best signal. Run outdoor coaxial cable into building in a convenient location to connect with signal repeater. Mount your indoor antenna with signal repeater. Power up signal repeater device to check the signal inside, moving outdoor antenna until you get satisfied signal. Connect outdoor (BTS) port with outdoor antenna. Connect indoor ANT (MS) port with indoor antenna. Outdoor antenna is mounted at a higher position. Both antennas should be 10 meters far away at least from each other. Indoor and outdoor antennas must be separated by wall. If the signal is still weak after installation, please check whether or not the outdoor antenna is pointed to signal tower correctly or elsewhere with stronger signal and confirm that the signal strength achieved -70dBm. If no signal for a long time after installation, please check the device power adapter whether or not connected perfectly and connectors connect well. If strength is not steady, please check if outdoor and indoor antennas are too close. Please ensure outdoor antenna has distance of 10 meters at least, with a barrier and not in a same horizontal line. Packed the outdoor connector by waterproof glue, otherwise wet condition will reduce the signal cover area. 198 x 182 x 20mm. 1 x 9dB Outdoor Antenna 1 x 5dB Indoor Antenna 1 x 5m RG6-50 OHM Indoor Coaxial Cable 1 x 10m RG6-50 OHM Outdoor Coaxial Cable 1 x Mounting Accessories Set 1 x AC Power Supply 1 x Manual. Uplink 18-22dBm Downlink 18-22dBm. Faqs – Termini e condizioni. The item “TECH Gold Mobile LED WCDMA 2100MHz & GSM 900MHz Signal Booster / Signal Repeate” is in sale since Wednesday, October 29, 2014. This item is in the category “Telefonia fissa e mobile\Accessori cellulari e palmari\Amplificatori di segnale”. The seller is “superteck” and is located in Nola, Napoli IT. This item can be shipped worldwide.
  • Brand: Unbranded/Generic
  • Marca: Unbranded/Generic
  • MPN: SK_S-SPB-0012
SUNHANS SHWA2100WP 2100MHz 3G Mobile Signal Booster Repeater Whip Antenna - April 12, 2018 by admin
SUNHANS SHWA2100WP 2100MHz 3G Mobile Signal Booster Repeater Whip Antenna

SUNHANS SHWA2100WP 2100MHz 3G Mobile Signal Booster Repeater Whip Antenna

SUNHANS SHWA2100WP 2100MHz 3G Mobile Signal Booster Repeater Whip Antenna

SUNHANS SHWA2100WP 2100MHz 3G Mobile Signal Booster Repeater Whip Antenna

SUNHANS SHWA2100WP 2100MHz 3G Mobile Signal Booster Repeater Whip Antenna

SUNHANS SHWA2100WP 2100MHz 3G Mobile Signal Booster Repeater Whip Antenna

SUNHANS SHWA2100WP 2100MHz 3G Mobile Signal Booster Repeater Whip Antenna

SUNHANS SHWA2100WP 2100MHz 3G Mobile Signal Booster Repeater Whip Antenna

3G LTE Mobile signal amplifier booster. Provides the ultimate solution in any area where cellular communications can not work well due to eak of signals. Device features easy installation operation, with pack of outdoor indoor antenna and no interference. It could also improve indoor electromagnetism environments, protract cellular battery life and reduce radiation of cellphones. 1 x SH-WA2100-M2 3G repeater. 1 x N male to SMA famale coaxial cable (10m). 1 x 8dBi indoor antenna. 1 x 12dBi outdoor antenna. 1 x power supply. 1 x user manual. 13.8 x 4.7 x 2.1cm. We will do our best for you. If you have any question and request for it, just let us know. The item “SUNHANS SHWA2100WP 2100MHz 3G Mobile Signal Booster Repeater Whip Antenna” is in sale since Thursday, March 03, 2016. This item is in the category “Computers/Tablets & Networking\Home Networking & Connectivity\Boosters, Extenders & Antennas”. The seller is “redsweat” and is located in China. This item can be shipped worldwide.
  • Type: Booster Antenna Kit
  • Brand: SUNHANS
  • Model: SHWA2100WP
  • MPN: 2100MHz 3G mobile signal repeater
2100MHz 3G LTE 4G Mobile Repeater Signal Booster 70dB Gain for Home/Office Use - March 25, 2018 by admin
2100MHz 3G LTE 4G Mobile Repeater Signal Booster 70dB Gain for Home/Office Use

2100MHz 3G LTE 4G Mobile Repeater Signal Booster 70dB Gain for Home/Office Use

2100MHz 3G LTE 4G Mobile Repeater Signal Booster 70dB Gain for Home/Office Use

2100MHz 3G LTE 4G Mobile Repeater Signal Booster 70dB Gain for Home/Office Use

2100MHz 3G LTE 4G Mobile Repeater Signal Booster 70dB Gain for Home/Office Use

2100MHz 3G LTE 4G Mobile Repeater Signal Booster 70dB Gain for Home/Office Use

2100MHz 3G LTE 4G Mobile Repeater Signal Booster 70dB Gain for Home/Office Use

2100MHz 3G LTE 4G Mobile Repeater Signal Booster 70dB Gain for Home/Office Use

2100MHz 3G LTE 4G Mobile Repeater Signal Booster 70dB Gain for Home/Office Use

You may also like. 2100MHz 3G LTE 4G Mobile Repeater Signal Booster 70dB Gain for Home/Office Use. 3 Inactivity Mode: When no user calls, the device works in standby mode, the uplink power amplifier is switched off, and the static power is decreased by 30%, so as to achieve the purpose of energy saving. 4AGC (Automatic Gain Control): When the downlink output signal is too strong or self-oscillated, the uplink and downlink can automatically reduce the gain and reduce the interference signal. 5Automatic Power Shut-down: When the self-oscillation happens, and the link attenuation value reaches 20dB, the MCU sends out the instruction and shut-down the PA. 6MGC (Manual Gain Control): In order to install the booster conveniently, all frequency band of the booster have the Gain attenuation adjustment function, the adjustment scope is 0-20dB. You can rotate the Manual Gain Control Knob to the OFF state and turn off the corresponding frequency band. 7 ALC(Automatic Level Control): Automatically adjust the output gain down to optimal figure while the output gain is above the optimal figure by the ALC circuit, this can greatly optimize the calling quality, data transfer quality, avoid the signal self- oscillation, and also very much reduce the interference to the cell tower, even if your house is very close from the cell tower, you don’t need to worry about the interference and the trouble caused. Ion happen or attenuation value reaches 20dB, power supply is shut down. Nput signals may be not enough. Ion happen , AGC is workingt. He attenuation value is more than. This booster only works for 2100MHz. 0-1 bar outside signal may not be suitable for using it. Before ordering, please check your local signal frequency by calling network operator or checking on some sites. For installation, you are supposed to pay attention to the following points: 1 There is seperate wall between indoor and outdoor antennas to make two antenna signal not interfere with each other. 2 To avoid interference, please make the distance of indoor and outdoor antenna more than 10 meters, let them not pointed at each other. Package: 1 70dB Booster Standalone 1 Power Adapter 1 Mounting Screw Kit 1 English User Manual 1 3dBi Indoor Right Agnle Antenna 1 10dBi Outdoor Directional Omni Antenna with 50 Feet Cable. Warning: Before ordering : wrong frequency and only 1 bar or 0 bar outside signal may make booster not working. Please check related frequency sites or call network operator to make sure the right local frequency from base station. After Sale : If any problem with the booster, please contact the customer service and we will try our best to solve. Three Months Free Replacement 3. Support Wholesales, More Units More Discount. We can provide high quality products and solutions that you want from your amplifier suppliers. How does it work? Can I use the signal booster when the outdoor signal has 0 bar? 1 A signal booster kit mainly includes a signal amplifier , an outdoor antenna(with a 10 meters coaxial cable), and an internal antenna(with a 5 meters coaxial cable) etc. For example, if your outside signal has 0 bar, it can not work or bring you any signal. My outside signal only has 1 bar, the booster can bring me signal? According to this situation, you need a higher dB gain booster (80dB gain)+ a higher dbi outdoor LPDA antenna+ a higher dbi indoor wall panel antenna. You can contact our customer service to get related information. What do I need to know before ordering a signal booster? Before ordering, you need to know your network operator frequency. Every network operator has its own technology and frequency. The signal booster can only work well when it is suitable for your network frequency, otherwise it would not boost any signal. I do not know my network frequency? How can I know it? Before ordering, you can search the frequency site or call your network operator to get information: Other choice: contact the customer service to provide related information to recommend. Tell us your network operator , and it is used in which country. Tell us network current signal type(2g 3g or 4g) C. Tell us to use it to transmit voice or data. How can we do if we order the wrong frequency booster? You can contact the customer service to get the solution. Why is my signal still same after installing the booster kit? The booster or the antenna is broken down. Maybe it is the signal input and signal output interfere with each other. You need make sure: There is separate wall between indoor and outdoor antenna, so that the two antenna signal do not interfere with each other. Please try to change the direction of outdoor antenna. What square meters signal will the booster cover. According to the house construction, material, outside signal, etc. It can boost signal as much as 2000 square meters. More information, you can contact the customer service. About receiving the incomplete parcel? Houses are built with much reinforced concrete, roof is with heat shield , or the outside walls are backed with foil. In this case, the signal booster can work and play an important role. What is the difference of different outdoor antennas? For area with good outdoor signal strength, you will need the standard Omni directional antenna which does not need to be pointed at the local mast asit receives and broadcasts the signal in all directions, such as the omni tube antenna , the fiber glass antenna, etc. If the outdoor signal is weak, you need the outdoor directional antenna which should be pointed to the base station to get signal, such as the outdoor yagi antenna, the outdoor LPDA antenna, etc. What is the difference of different indoor antennas? The right angle antenna is the plug and play antenna, and it does not have cable, but convenient to install, suitable for the area around 100 square meters. The indoor ceiling antenna and the indoor wall panel antenna have 5 meters cables, more flexible, 4-6 of these antennas can be connected to one booster standalone to bring signal around 4-6 rooms, which covers signal around 2000 square meters, especially suitable for the large area such as factory, company office, multilayer building, etc. (2) PO BOX address is not allowed with express way. Reason is because transit time is highly depended and provided by Postal Service. (5) The express (UPS , FedexDHL) excludes those country: Brazil, Russia, Qatar, Egypt, Brunei, Saudi Arabia, Kuwait, Jordan, Iraq. What you need to do about return: 1When getting boosters, contact customer service directly to solve your return within 30 days without needing to open return request. On the store, we can solve it as soon as possible. ANNTLENT booster provides a rapid and perfect solution to solve and optimize the weak signal of houses, offices, hotels, elevators, underground parking lots and other small weak signal area. Welcome you all to order. We provide the best sale service and after sale service. The item “2100MHz 3G LTE 4G Mobile Repeater Signal Booster 70dB Gain for Home/Office Use” is in sale since Friday, February 23, 2018. This item is in the category “Phones & Accessories\Mobile Accessories\Mobile Phone Repeaters”. The seller is “repeaterbay” and is located in SHENZHEN. This item can be shipped worldwide.
  • Brand: ANNTLENT
  • Model: AN-W70PLUS
  • MPN: AN-W70PLUS-AOW-K2
  • Compatible Brand: Universal
  • Connectivity: Wireless Repeater/Multi-User
  • Remote Antenna: Coaxial Cable;Wall Charger/Adapter
  • Country/Region of Manufacture: China
  • Frequency Bands: 2100MHz
  • Gain: 70dB
  • Usage: Boost cell phone signal
  • Type: Booster
  • Compatible Network: Optus
Gsm Dual Band Booster Mobile Phone Signal Repeater 900mhz and 2100mhz kit - March 21, 2018 by admin
Gsm Dual Band Booster Mobile Phone Signal Repeater 900mhz and 2100mhz kit

Gsm Dual Band Booster Mobile Phone Signal Repeater 900mhz and 2100mhz kit

Bought and never used. Includes internal and external antenna, booster, power supply and connecting cable. See photo for specifications. The item “Gsm Dual Band Booster Mobile Phone Signal Repeater 900mhz and 2100mhz kit” is in sale since Monday, March 19, 2018. This item is in the category “Mobile Phones & Communication\Mobile Phone & PDA Accessories\Signal Boosters”. The seller is “tinbum” and is located in GOOLE, East Riding of Yorkshire. This item can be shipped to United Kingdom, Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Australia, United States, Russian federation, Canada, Brazil, Japan, New Zealand, China, Israel, Hong Kong, Norway, Mexico, Singapore, South Korea, Switzerland, Thailand, South africa, Chile.
  • Brand: Unbranded/Generic
  • Country/Region of Manufacture: China
ELETTRONICA Gold Mobile LED WCDMA 2100MHz & GSM 900MHz Signal Booster / Signal - March 7, 2018 by admin
ELETTRONICA Gold Mobile LED WCDMA 2100MHz & GSM 900MHz Signal Booster / Signal

ELETTRONICA Gold Mobile LED WCDMA 2100MHz & GSM 900MHz Signal Booster / Signal

ELETTRONICA Gold Mobile LED WCDMA 2100MHz & GSM 900MHz Signal Booster / Signal

Gold Mobile LED WCDMA 2100MHz & GSM 900MHz Signal Booster / Signal Repeater wit. Vedi i nostri feedback. In case of emergency a timely call can save a life. Unfortunately, there are still some places where one can find themselves – out of coverage. Here we will bring you a new kind of LED signal booster. High-gain linear power amplifier. ALC and AGC function technology. Ultra-low noise receive amplifier. There is no interference to the base station, right after the opening of the original system and the base station without the need to adjust parameters. Stable and reliable electromagnetic compatibility design. The base station dose not cause an increase in background noise, but will not lead to a decline in the quality of the base station communications. With full-duplex communication mode. It explores an effective and reasonable method to dispel the heat. Install outdoor antenna in that location and keep adjusting, point it to signal tower station, try to get best signal. Run outdoor coaxial cable into building in a convenient location to connect with signal repeater. Mount your indoor antenna with signal repeater. Power up signal repeater device to check the signal inside, moving outdoor antenna until you get satisfied signal. Connect outdoor (BTS) port with outdoor antenna. Connect indoor ANT (MS) port with indoor antenna. Outdoor antenna is mounted at a higher position. Both antennas should be 10 meters far away at least from each other. Indoor and outdoor antennas must be separated by wall. If the signal is still weak after installation, please check whether or not the outdoor antenna is pointed to signal tower correctly or elsewhere with stronger signal and confirm that the signal strength achieved -70dBm. If no signal for a long time after installation, please check the device power adapter whether or not connected perfectly and connectors connect well. If strength is not steady, please check if outdoor and indoor antennas are too close. Please ensure outdoor antenna has distance of 10 meters at least, with a barrier and not in a same horizontal line. Packed the outdoor connector by waterproof glue, otherwise wet condition will reduce the signal cover area. 198 x 182 x 20mm. 1 x 9dB Outdoor Antenna 1 x 5dB Indoor Antenna 1 x 5m RG6-50 OHM Indoor Coaxial Cable 1 x 10m RG6-50 OHM Outdoor Coaxial Cable 1 x Mounting Accessories Set 1 x AC Power Supply 1 x Manual. Uplink 18-22dBm Downlink 18-22dBm. Faqs – Termini e condizioni. The item “ELETTRONICA Gold Mobile LED WCDMA 2100MHz & GSM 900MHz Signal Booster / Signal” is in sale since Wednesday, February 04, 2015. This item is in the category “Telefonia fissa e mobile\Accessori cellulari e palmari\Amplificatori di segnale”. The seller is “napolitano86″ and is located in Nola, Napoli IT. This item can be shipped worldwide.
  • Brand: Unbranded/Generic
  • Marca: Unbranded/Generic
  • MPN: SK_S-SPB-0011
TECH Gold Mobile LED WCDMA 2100MHz & GSM 900MHz Signal Booster / Signal Repeate - January 29, 2018 by admin
TECH Gold Mobile LED WCDMA 2100MHz & GSM 900MHz Signal Booster / Signal Repeate

TECH Gold Mobile LED WCDMA 2100MHz & GSM 900MHz Signal Booster / Signal Repeate

TECH Gold Mobile LED WCDMA 2100MHz & GSM 900MHz Signal Booster / Signal Repeate

Gold Mobile LED WCDMA 2100MHz & GSM 900MHz Signal Booster / Signal Repeater wit. Vedi i nostri feedback. In case of emergency a timely call can save a life. Unfortunately, there are still some places where one can find themselves – out of coverage. Here we will bring you a new kind of LED signal booster. High-gain linear power amplifier. ALC and AGC function technology. Ultra-low noise receive amplifier. There is no interference to the base station, right after the opening of the original system and the base station without the need to adjust parameters. Stable and reliable electromagnetic compatibility design. The base station dose not cause an increase in background noise, but will not lead to a decline in the quality of the base station communications. With full-duplex communication mode. It explores an effective and reasonable method to dispel the heat. Install outdoor antenna in that location and keep adjusting, point it to signal tower station, try to get best signal. Run outdoor coaxial cable into building in a convenient location to connect with signal repeater. Mount your indoor antenna with signal repeater. Power up signal repeater device to check the signal inside, moving outdoor antenna until you get satisfied signal. Connect outdoor (BTS) port with outdoor antenna. Connect indoor ANT (MS) port with indoor antenna. Outdoor antenna is mounted at a higher position. Both antennas should be 10 meters far away at least from each other. Indoor and outdoor antennas must be separated by wall. If the signal is still weak after installation, please check whether or not the outdoor antenna is pointed to signal tower correctly or elsewhere with stronger signal and confirm that the signal strength achieved -70dBm. If no signal for a long time after installation, please check the device power adapter whether or not connected perfectly and connectors connect well. If strength is not steady, please check if outdoor and indoor antennas are too close. Please ensure outdoor antenna has distance of 10 meters at least, with a barrier and not in a same horizontal line. Packed the outdoor connector by waterproof glue, otherwise wet condition will reduce the signal cover area. 198 x 182 x 20mm. 1 x 9dB Outdoor Antenna 1 x 5dB Indoor Antenna 1 x 5m RG6-50 OHM Indoor Coaxial Cable 1 x 10m RG6-50 OHM Outdoor Coaxial Cable 1 x Mounting Accessories Set 1 x AC Power Supply 1 x Manual. Uplink 18-22dBm Downlink 18-22dBm. Faqs – Termini e condizioni. The item “TECH Gold Mobile LED WCDMA 2100MHz & GSM 900MHz Signal Booster / Signal Repeate” is in sale since Wednesday, October 29, 2014. This item is in the category “Telefonia fissa e mobile\Accessori cellulari e palmari\Amplificatori di segnale”. The seller is “superteck” and is located in Nola, Napoli IT. This item can be shipped worldwide.
  • Brand: Unbranded/Generic
  • Marca: Unbranded/Generic
  • MPN: SK_S-SPB-0011
Amplificatore ripetitore di segnale mobile LED WCDMA 2100MHz e GSM 900MHz - January 15, 2018 by admin
Amplificatore ripetitore di segnale mobile LED WCDMA 2100MHz e GSM 900MHz

Amplificatore ripetitore di segnale mobile LED WCDMA 2100MHz e GSM 900MHz \N Su segnale Booster / > cellulare diventa particolarmente utile quando la gente ottiene in situazioni critiche. In caso di emergenza una chiamata tempestiva può salvare una vita. Purtroppo, ci sono ancora alcuni posti dove si può trovare se stessi – fuori copertura. Di solito quei luoghi sono sia troppo lontano dalla stazione base del telefono cellulare o si trova all’interno di costruzioni sotterranee, ad esempio: parcheggio un sacco, tunnel, grandi magazzini, edifici per uffici, automobili, barche, casa in aree remote, ecc \n qui noi vi porterà un nuovo tipo di ripetitore di segnale LED. \n \n caratteristiche \n 1. Amplificatore di potenza lineare ad alto guadagno. Tecnologia di funzione ALC e AGC. Bassissimo rumore ricevere amplificatore. Non c’è nessuna interferenza alla stazione base, subito dopo l’apertura del sistema originale e la stazione base senza la necessità di regolare i parametri. Design stabile e affidabile di compatibilità elettromagnetica. La dose di stazione base non causano un aumento nel rumore di fondo, ma non porterà ad un declino nella qualità delle comunicazioni stazione base. Con la modalità di comunicazione full-duplex. Esplora un metodo efficace e ragionevole per dissipare il calore. \n \n Passaggi di installazione \n 1. Utilizzare il telefono cellulare per testare la forza di segnale fuori casa o sul tetto, – 70dBm è il requisito di base (bar completo). Installare l’antenna esterna in quella posizione e mantenere la regolazione, puntarlo alla stazione di Torre del segnale, cercare di ottenere il miglior segnale. Correre all’aperto cavo coassiale in costruzione in una posizione comoda per connetterti con ripetitore di segnale. Montare l’antenna interna con ripetitore di segnale. Accendere il dispositivo ripetitore di segnale per controllare il segnale all’interno, antenna esterna in movimento fino a quando si ottiene il segnale soddisfatti. \n \n avvisi \n 1. Collegare all’aperto (BTS) porta con antenna esterna. Collegare interna porta ANT (MS) con antenna interna. Antenna esterna è montato in posizione elevata. Entrambe le antenne dovrebbero essere almeno 10 metri di distanza gli uni dagli altri. Antenne interne ed esterne devono essere separati da parete. Se il segnale è ancora debole dopo l’installazione, si prega di controllare o meno l’antenna esterna è puntato alla torretta del segnale correttamente o altrove con il segnale più forte e confermare che la potenza del segnale raggiunto – 70dBm. Se nessun segnale per lungo tempo dopo l’installazione, si prega di controllare l’adattatore di alimentazione del dispositivo o meno collegato perfettamente e connettori collegano bene. Se la forza non è costante, controlli prego se antenne all’aperto e al coperto sono troppo vicini. Si prega di assicurare antenna esterna ha distanza di 10 metri almeno, con una barriera e non in una stessa linea orizzontale. Confezionato il connettore esterno da colla impermeabile, altrimenti stato bagnato ridurrà il segnale copertura zona. The item “Amplificatore ripetitore di segnale mobile LED WCDMA 2100MHz e GSM 900MHz” is in sale since Sunday, July 24, 2016. This item is in the category “Telefonia fissa e mobile\Accessori cellulari e palmari\Amplificatori di segnale”. The seller is “happyprize” and is located in Nola, Napoli, IT. This item can be shipped worldwide.
  • Marca: – Senza marca//Generico -
  • MPN: Non applicabile
Antenne Booster Mobile LED WCDMA 2100MHz et GSM 900MHz Signal Répéteur de avec L - December 22, 2017 by admin
Antenne Booster Mobile LED WCDMA 2100MHz et GSM 900MHz Signal Répéteur de avec L

Antenne Booster Mobile LED WCDMA 2100MHz et GSM 900MHz Signal Répéteur de avec L

Antenne Booster Mobile LED WCDMA 2100MHz et GSM 900MHz Signal Répéteur de avec L

Antenne Booster Mobile LED WCDMA 2100MHz et GSM 900MHz Signal Répéteur de avec L

Antenne Booster Mobile LED WCDMA 2100MHz et GSM 900MHz Signal Répéteur de avec L

Antenne Booster Mobile LED WCDMA 2100MHz et GSM 900MHz Signal Répéteur de avec L

Antenne Booster Mobile LED WCDMA 2100MHz et GSM 900MHz Signal Répéteur de avec L

Antenne Booster Mobile LED WCDMA 2100MHz et GSM 900MHz Signal Répéteur de avec L

Antenne Booster Mobile LED WCDMA 2100MHz et GSM 900MHz Signal Répéteur de avec L

Antenne Booster Mobile LED WCDMA 2100MHz et GSM 900MHz Signal Répéteur de avec L

ATTENTION : Avant d’acheter nos produits, merci de bien prendre connaissance des délais de livraison qui peuvent aller de 3 à 15 jours ouvrés suivant les produits. La date estimée de livraison est indiquée un peu en dessous du prix en haut de la fiche produit. N’hésitez pas à nous contacter au 0806110225 (non surtaxé) si vous avez la moindre question. Sachez également que vous êtes satisfait ou remboursé 30 jours et que tous nos produits sont garantis 2 ans. Antenne Booster Mobile LED WCDMA 2100MHz et GSM 900MHz Signal Répéteur de avec Logarithm Périodique Or À propos de amplificateur de signal Le téléphone cellulaire devient particulièrement utile lorsque les gens entrent dans des situations critiques. En cas d’urgence, appel en temps opportun peut sauver une vie. Malheureusement, il existe encore des endroits où l’on peut se retrouver – hors de portée. Habituellement, ces endroits sont soit trop éloignés de la station de base du téléphone portable, soit situés à l’intérieur des constructions souterraines, par exemple: les parcs de stationnement, les tunnels, les grands magasins, les immeubles de bureaux, les voitures, les bateaux, les maisons isolées, etc. Ici, nous vous apporterons nouveau type d’amplificateur de signal LED. Amplificateur de puissance linéaire à gain élevé. Technologie de fonction ALC et AGC. Amplificateur de réception de bruit ultra-bas. Il n’y a pas d’interférence dans la station de base, juste après l’ouverture du système d’origine et de la station de base sans qu’il soit nécessaire d’ajuster les paramètres. Conception de compatibilité électromagnétique stable et fiable. La dose de la station de base ne provoque pas une augmentation du bruit de fond, mais n’entraînera pas une baisse de la qualité des communications de la station de base. Avec le mode de communication full-duplex. Il explore une méthode efficace et raisonnable pour dissiper la chaleur. Étapes d’installation 1. Utilisez votre téléphone portable pour tester la puissance du signal en dehors de la maison ou sur le toit, -70dBm est l’exigence de base (barre pleine). Installez l’antenne extérieure dans cet endroit et continuez à l’ajuster, pointez-le sur la station de signalisation, essayez d’obtenir le meilleur signal. Exécuter coaxial extérieurCâble dans emplacement convenable pour se connecter au répéteur de signal. Monter votre antenne intérieure avec répéteur de signal. Démarrez le dispositif de répétition du signal pour vérifier le signal à l’intérieur, en déplaçant l’antenne extérieure jusqu’à ce que vous obteniez signal satisfaisant. Connectez le port extérieur (BTS) avec une antenne extérieure. Connectez le port ANT (MS) à l’intérieur avec une antenne intérieure. L’antenne extérieure est montée à une position plus élevée. Les deux antennes devraient être au moins 10 mètres au loin. Les antennes intérieures et extérieures doivent être séparées par mur. Si le signal est encore faible après l’installation, vérifiez si l’antenne extérieure est pointue à la tour de signal correctement ou ailleurs avec signal plus fort et confirmez que la puissance du signal a atteint -70dBm. Si aucun signal ne dure longtemps après l’installation, vérifiez si l’adaptateur d’alimentation du périphérique est bien connecté ou bien les connecteurs se connectent correctement. Si la force n’est pas stable, vérifiez si les antennes extérieures et intérieures sont trop proches. Assurez-vous que l’antenne extérieure a une distance d’au moins 10 mètres, avec une barrière et pas dans une même ligne horizontale. Emballé le connecteur extérieur par une colle waterproof, sinon l’état humide réduira la surface du couvercle du signal. 198 x 182 x 20 mm. 1 x 9dB Antenne extérieure, 1 x 5dB Antenne intérieure, 1 x 5m RG6-50 OHM Câble coaxial intérieur, 1 x 10m RG6-50 OHM Câble coaxial extérieur, 1 x ensemble d’accessoires de montage, 1 x alimentation secteur, 1 x manuel. Uplink 18-22dBm, Downlink 18-22dBm. 10 ° C 55 ° C. Contrôle automatique de gain. AC: 90 265V, 50 / 60Hz; DC: 12V 2A. Un poids de pack. The item “Antenne Booster Mobile LED WCDMA 2100MHz et GSM 900MHz Signal Répéteur de avec L” is in sale since Friday, December 08, 2017. This item is in the category “Téléphonie, mobilité\Tél. mobiles, PDA\ accessoires\Amplificateurs de signal”. The seller is “wewoo_fr” and is located in Mérignac. This item can be shipped worldwide.
  • Numéro de pièce fabricant: ACH-374361
  • Marque: Wewoo
ATNJ MS-W1 High Gain 80db 2100mhz 3G Mobile Signal Booster Repeater Amplifier - December 4, 2017 by admin
ATNJ MS-W1 High Gain 80db 2100mhz 3G Mobile Signal Booster Repeater Amplifier

ATNJ MS-W1 High Gain 80db 2100mhz 3G Mobile Signal Booster Repeater Amplifier

ATNJ MS-W1 High Gain 80db 2100mhz 3G Mobile Signal Booster Repeater Amplifier

ATNJ MS-W1 High Gain 80db 2100mhz 3G Mobile Signal Booster Repeater Amplifier

ATNJ MS-W1 High Gain 80db 2100mhz 3G Mobile Signal Booster Repeater Amplifier

ATNJ MS-W1 High Gain 80db 2100mhz 3G Mobile Signal Booster Repeater Amplifier

ATNJ MS-W1 High Gain 80db 2100mhz 3G Mobile Signal Booster Repeater Amplifier

ATNJ MS-W1 High Gain 80db 2100mhz 3G Mobile Signal Booster Repeater Amplifier

ATNJ MS-W1 High Gain 80db 2100mhz 3G Mobile Signal Booster Repeater Amplifier

Suitable: global applicatioin for home/office/apartment… 1, Dual band booster. 3, Outdoor log-periodic Antenna. 4, Indoor Ceiling antenna. 5, Indoor 5M cable. 6, Outdoor 16M cable. We will do our best for you. If you have any question and request for it, just let us know. The item “ATNJ MS-W1 High Gain 80db 2100mhz 3G Mobile Signal Booster Repeater Amplifier” is in sale since Thursday, May 25, 2017. This item is in the category “Computers/Tablets & Networking\Home Networking & Connectivity\Boosters, Extenders & Antennas”. The seller is “redsweat” and is located in China. This item can be shipped worldwide.
  • Brand: ATNJ
  • Model: MS-W1 2100mhz
  • MPN: Mobile Signal Booster Antenna Kit
  • Type: Mobile Signal Booster Antenna Kit
  • Frequency Bands: 2100mhz
« old entrys
Post Archive